Planet Default Router Passwords
This page lists 5 confirmed default credentials for Planet equipment, covering 5 models. The pairing you are most likely to need is admin with epicrouter.
Entries are reachable over http and multi. 3 of these entries use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
admin4 of 5 entriesepicrouter2 of 5 entries| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| ADE-4000 | MULTI | Admin | admin | epicrouter |
| ADE-4110 | HTTP | Admin | admin | epicrouter |
| AKCESS POINT | HTTP | Admin | admin | admin |
| WAP-1900/1950/2000 Rev. 2.5.0 | MULTI | Admin | leave blank | default |
| XRT-401D | HTTP | Admin | admin | 1234 |
About Planet
PLANET Technology makes industrial switches, PoE gear and VoIP hardware. The Planet records here run across the ADE- line.
Reaching the login page
The admin page on most Planet units answers at http://192.168.0.1. If that address does not load, the router is whatever your computer lists as its default gateway — ipconfig on Windows or ipconfig getoption en0 router on a Mac will tell you.
The steps, and what to try when the page will not load, are in our 192.168.0.1 login guide.
What the Planet defaults look like
admin is the username on 4 of the 5 entries. One entry asks for no username at all. Where one is set, epicrouter comes up most often, on 2 entries.
3 of them are reached over a protocol that puts the password on the wire in clear text, so work from a machine on the same wired network rather than across the internet, and change the password once you are in.
If the Planet password has already been changed
There is a recessed reset button on the back or underneath that needs a straightened paperclip. Hold it in for thirty seconds with the unit powered on. Let go when the lights change pattern, and give it a couple of minutes to come back up.
A reset clears more than the password. The Wi-Fi name and key go back to what is printed on the label, port forwards and firewall rules are discarded, and any static addressing is lost. Photograph the settings pages first — it takes two minutes and saves an evening.
Share This Page